1_First, fix it with an air tacker in the marked part

2_Use a tool with adequate pressure so that it does not pass through the cork mat.

If the mounting surface is concrete or it is difficult to install with screw, you can install with silicon adhesive and double-sided tape.

1_Stick double-sided tape on the four corners of moss tile

2_Apply silicone adhesive to the location shown in the picture. Since the product is not that heavy, using a little silicone adhesive is enough.

3_You can continue installing in the same way. If moss falls off during the installation process, repair it with a silicone adhesive or glue gun.

4_Double-sided tape is for temporary fixing while the silicone adhesive is curing. Finishing with double-sided tape only is not recommended.

5_If necessary, cut the cork mat with a knife or scissors.

LIGHT

WATER

TEMPERATURE

NUTRIENT

SCANDIAMOSS MANAGEMENT METHOD

SCANDIAMOSS is not affected by room temperature and light.

If Scandiamoss is in direct contact with water, it loses all functions. (Do not water)

Scandiamoss, moisture absorber

The shape and feel of the moss change depending on the humidity in the room. In case of 40% and above indoor humidity, the moss absorbs moisture and has soft feeling. In case of 30% and below indoor humidity, the moss loses moisture and has hard feeling. When indoor humidity goes up, soft feeling will be restored.

┌─────────────┐

Various functions,

Maintenance free

Functional interior panel

with nature

└─────────────┘

'ALL POSSIBILITIES IN THE WORLD'
Samsung Leeum, Museum of Art

OLAFUR ELIASSON'S 'MOSS WALL'

Scandiamoss' various functions and natural colors are evaluated as natural and luxurious, and we are working on various projects with artists with excellent color sense and many global companies.

Even though natural moss looks the same, their effect and function vary depending on the preservation technology

Materials I have to touch and make... Is it safe for my skin?

SCANDIAMOSS (function preservation method moss)

Similar moss (shape preservation method moss)

1. Color difference

2. Discolorization when soaked in water

3. Ignition check (harzardous gas)

SCANDIAMOSS

SIMILAR MOSS

SCANDIAMOSS

SIMILAR MOSS

SCANDIAMOSS

SIMILAR MOSS

The color of the
lower part where
heat transfer is
lowered by natural
mineral heat
treatment method is relatively dark

The product is dyed after complete
dehydration, so
the overall color is
evenly expressed

It hardens but
does not now
show severe
discoloration

As the glycerin
added for shape
preservation melts,
it hardens with
severe discoloration

Keeping the fire

As soon as the
fire touched, it
catches on fire
and emits
hazardous gas

 SCANDIAMOSS MADE BY

FUNCTION PRESERVATION METHOD

01 COLLECTION

Collected in a lawful way that does not damage nature

Country of Origin : Norway

02 NATURAL DRYING

Drying so that the moisture content of the collected moss is constant to maintain the uniform quality

03 STERTLIZATION

HEAT TREATMENT

Sterilization heat treatment with steam prevents fiber deformation of moss and prevents insects and bacteria from in habiting

04 NATURAL MINARALS

+ HEAT TREATMENT

Heat treatment process creates the core technology which absorbs and discharge the moisture in the air to keep the soft texture of Scandiamoss. Also, heat treatment process with various natural minerals creates diverse colors and effective functions of SCANDIAMOSS.

Through this process, SCANDIAMOSS becomes able to breathe by itself and show luxurious and profound natural color that does not look monotonous. Scandiamoss is a clean and safe material without skin irritation and hazardous gas.  

 SCANDIAMOSS MADE BY

SHAPE PRESERVATION METHOD

01 COLLECTION

Collect the moss in the nature 

Country of Origin: China, Mongolia, Russia, etc.

02 DEHYDRATION AND

PRESERVATION TREATMENT

Dehydration (discoloration) and preservation treatment using alcohol, glycerin, polyether diol compound, cyclomethytone, emulsifier, surfactant compound

03 DYEING

Completely dehydrated (bleached) moss is soaked in a coloration liquid (dyeing agent) for about a day to artificially generate an even color.

04 DRYING

Drying 3~7 days in the outside because it is high flammable and has strong ordor. The moss manufactured in this method may look similar, but it has artificial feeling made by chemicals. Unlike SCANDIAMOSS which breathes naturally, they do not have a function to absorb and discharge the air and are easy to catch on fire, showing completely different features from SCANDIAMOSS. 

Similar moss products have been completely bleached and dyed using chemicals have color and feeling like artificaial one. Products produced in this way pollute the environment by generating a large amount of waste during the production process.

The color of SCANDIAMOSS has been made only with natural materials

without using any chemicals,

Therefore, the color of SCANDIAMOSS is expressed in the same form

as the natural growth environment, so the lowr part attached to the soil comes out dark.

SCANDIAMOSS production process does not generate chemical waste that pollutes the environment.

 The core value of our function preservation technology is the coexistence of nature and human. For eco-friendly and prosperous life, all the process of collection, natural drying, sterilization, heat treatment and natural mineral process are based on our core value.

The moss is collected directly from the soil by handwork with care so the moss can reproduce again in the place where the moss was collected without damaging the nature by indiscreet collection.

Reindeer moss, the orifinal raw material of SCANDIAMOSS, is collected accroding to a strict manual to preserve nature. Since the collected amount is small and rare, Scandia is making more effort to develop function preservation technology.